Agilent User Information System
按一下此处即可查看此页面的完整内容
Home
>
维护
>
维护任务
维护任务
G7175A 液位传感的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
清洁模块
卸下溶剂管
重新填充溶剂瓶
更换溶剂入口过滤器
更换溶剂瓶托盘
Replace the Module Firmware
G7110B 单元泵、G7111A 四元泵 VL、G7111B 四元泵、G5654A 生物惰性泵的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
清洁模块
Remove and Install Doors
Checking and Replacing the Solvent Filter
更换被动入口阀
更换出口阀
更换冲洗阀滤芯或冲洗阀
Replace the O-Ring on the Purge Valve
卸下泵头组件
不带密封垫冲洗选项的泵头的维护
不带密封垫冲洗选项的泵头的维护
Maintenance of a Pump Head with Seal Wash Option
Maintenance of a Pump Head with Seal Wash Option (Infinity III Support Ring Design)
重新安装泵头组件
Seal Wear-in Procedure
Replace the Multi-Channel Gradient Valve (MCGV)
Replace the Four-Channel Gradient Valve (4CGV)
Replace the Solvent Selection Valve (Isocratic Pump)
Exchange the Active Inlet Valve (AIV) or its Cartridge
更换密封垫清洗阀芯
Replace Leak Handling System Parts
Replace the Module Firmware
G7104A 多功能泵、G7104C 多功能泵、G7131A Bio 多功能泵、G7131C Bio 多功能的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
清洁模块
Installing Fittings and Capillaries
Remove and Install Doors
Replace the Pressure Sensor
Replace the Inlet Weaver
Replace the Inlet Valve (G7104A)Replace the Inlet Valve (G7104C)
Replace the Inlet Valve (G7131A)Replace the Inlet Valve (G7131C)
Remove the Jet Weaver
Install the Jet Weaver
更换密封垫冲洗泵
Replace the Multi-Channel Gradient Valve (MCGV)
Replace the Four-Channel Gradient Valve (4CGV)
Release a Stuck Inlet Valve
卸下泵头组件 (G7104A)卸下泵头组件 (G7104C)
卸下泵头组件 (G7131A)卸下泵头组件 (G7131C)
Pump Head Maintenance (Tool Free)
安装泵头组件 (G7104A)安装泵头组件 (G7104C)
安装泵头组件 (G7131A)安装泵头组件 (G7131C)
Replace the Outlet Valve (G7104A)Replace the Outlet Valve (G7104C)
Replace the Outlet Valve (G7131A)Replace the Outlet Valve (G7131C)
Replace the Multipurpose Valve
Replace Parts of the Multipurpose Valve (G7104A)Replace Parts of the Multipurpose Valve (G7104C)
Replace Parts of the Multipurpose Valve (G7131A)Replace Parts of the Multipurpose Valve (G7131C)
更换高压出口过滤器或过滤器滤芯
Install the Inline Filter
Remove the Inline Filter
更换内置过滤器的部件
Replace the Seal Wash Sensor
Replace the Module Firmware
Prepare the Pump Module for Transport
G4782A SFC 二元泵的维护
与维护相关的安全信息
Introduction to Maintenance
Overview of Maintenance and Simple Repairs
Maintenance Procedures
清洁模块
Remove and Install Doors
Exchanging the Purge Valve Frit or the Purge Valve
Replace the O-Ring on the Purge Valve
Remove the Pump Head Assembly
Maintenance of a Pump Head without Seal Wash
Maintenance of a Pump Head with Seal Wash
Reinstall the Pump Head Assembly
Seal Wear-in Procedure
Exchange the Seal Wash Cartridge
Replace Leak Handling System Parts
Exchange the Inlet Valve
Exchange the Outlet Valve
Exchange the Solvent Selection Valve
Replace the Module Firmware
G7112B 二元泵的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
Maintenance Procedures
清洁模块
Remove and Install Doors
更换冲洗阀滤芯或冲洗阀
Replace the O-Ring on the Purge Valve
卸下泵头组件
Maintenance of a Pump Head Without Seal Wash Option
Maintenance of a Pump Head Without Seal Wash Option (Infinity III Support Ring Design)
带密封垫冲洗选项的泵头的维护
带密封垫清洗选项（Infinity III 支承环设计）的泵头的维护
重新安装泵头组件
Seal Wear-in Procedure
Exchange the Active Inlet Valve (AIV) or its Cartridge
Exchange the Seal Wash Cartridge
Replace Leak Handling System Parts
更换出口阀
Installation of the Solvent Selection Valve Upgrade Kit
Exchange the Solvent Selection Valve
Replace the Module Firmware
G7120A 高速泵、G7132A 生物高速泵的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
清洁模块
Installing Fittings and Capillaries
Remove and Install Doors
Replace the Shutoff Valve Panel
Replace the Pressure Sensor
Replace the Solvent Selection Valve (SSV)
Change Configuration or Replace the Jet Weaver
更换密封垫冲洗泵
Replace the Inlet Valve (G7120A)
Replace the Inlet Valve (G7132A)
Release a Stuck Inlet Valve
卸下泵头组件 (G7120A)
卸下泵头组件 (G7132A)
Pump Head Maintenance (Tool Free)
安装泵头组件 (G7120A)
安装泵头组件 (G7132A)
Replace the Outlet Valve (G7120A)
Replace the Outlet Valve (G7132A)
Replace the Purge Valve Head
Replace Parts of the Purge Valve Head
更换高压过滤器组件部件 (G7120A)
更换高压过滤器组件部件 (G7132A)
Replace the Seal Wash Sensor
Replace the Module Firmware
Prepare the Pump Module for Transport
G1328C 手动进样器、G5628A 生物惰性手动进样器的维护
Overview of Maintenance
Flushing the Manual Injector
Cleaning the Manual Injector
Exchanging the Injection Valve Seal
位置感应开关 (G1328C)
更换进样阀定子面 (G5628A)
G7129A 样品瓶进样器、G7129B 样品瓶进样器、G7129C 样品瓶进样器的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
清洁模块
Remove and Install Doors
更换进样针组件
更换针座组件
更换样品定量环组件
更换转子密封垫
更换计量密封垫和柱塞杆
Replace the Analytical Head
Exchange the Gripper Arm
Replace the Finger Caps
更换蠕动泵卡套
更换清洗口组件
Replace the Module Firmware
更换样品恒温器
G5668A 生物惰性 Multisampler、G7137A 生物 Multisampler、G7167A Multisampler、G7167B Multisampler 的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
清洁模块
Removal and Installation of the Front Door
卸下进样针组件
安装进样针组件
更换针座
更换转子密封垫
Replace the Injection Valve
取下计量密封垫
安装计量密封垫
更换蠕动泵卡套
Replace the Flush Head Seal
Remove the Sample Loop-Flex
Installing the Sample Loop-Flex
Replace the Dummy Drawer
Replace the Module Firmware
更换样品恒温器
G4767A SFC Multisampler 的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
清洁模块
Removal and Installation of the Front Door
Remove the Needle Assembly
Install the Needle Assembly
更换针座
更换转子密封垫
Replace the Injection Valve/Replace the Idex Valve
Remove the Metering Seal
Install the Metering Seal
更换蠕动泵卡套
Replace the Flush Head Seal
Remove the Sample Loop-Flex
Installing the Sample Loop-Flex
Replace the Dummy Drawer
Replace the Module Firmware
更换样品恒温器
G7167C 混合型 Multisampler 的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
清洁模块
Removal and Installation of the Front Door
Exchange the Needle Assembly
Exchange the Needle Seat
Replace the Injection Valve
Replace the Rotor Seal
Replace Analytical Heads/Metering Device
Remove the Metering Seal
Install the Metering Seal
更换蠕动泵卡套
Remove the Flush Head Seal
Install the Flush Head Seal
Remove the Sample Loop-Flex
Install the Sample Loop-Flex
Replace the Dummy Drawer
Replace the Module Firmware
更换样品恒温器
G7116A 高容量柱温箱、G7116B 高容量柱温箱的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
清洁模块
Correcting Leaks
更换快速切换阀头的部件
更换阀头
Prepare the MCT for Transportation
Replace the Module Firmware
G7114A 可变波长检测器、G7114B 可变波长检测器的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
清洁模块
Remove and Install Doors
更换氘灯
更换流通池/比色皿架
Repairing the Flow Cells
Using the Cuvette Holder
Correcting Leaks
Replace Leak Handling System Parts
Replace the Module Firmware
G7115A WR 二极管阵列检测器、G7165A 多波长检测器的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
清洁模块
Remove and Install Doors
更换灯
取出和安装流通池
Maintenance of Standard, Semi-Micro or Micro Flow Cell
Maintenance of High Pressure Flow Cell
Replacing Capillaries on a Standard Flow Cell
Replacing Capillaries on a Semi-Micro and Micro Flow Cell
Nano Flow Cell - Replacing or Cleaning
Cleaning or Exchanging the Holmium Oxide Filter
Correcting Leaks
Replace Leak Handling System Parts
Replace the Module Firmware
Information from Module’s Assemblies
G7117A 二极管阵列检测器 FS、G7117B 二极管阵列检测器、G7117C 二极管阵列检测器 HS 的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
清洁模块
Remove and Install Doors
更换氘灯
更换最大光强卡套流通池
Clean the Max-Light Cartridge Cell
Storage of Max-Light Cartridge Cell
Correcting Leaks
Replace Leak Handling System Parts
Replace the Module Firmware
Information from Module’s Assemblies
G7121A 荧光检测器、G7121B 荧光检测器光谱的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
清洁模块
Remove and Install Doors
更换流通池
How to Use the Cuvette
Flow Cell Flushing
Correcting Leaks
Replace Leak Handling System Parts
Replace the Module Firmware
Tests & Calibrations
G7162A 示差折光检测器、G7162B 示差折光检测器的维护
Introduction to Maintenance
与维护相关的安全信息
Overview of Maintenance
清洁模块
Storage of the Detector
Remove and Install Doors
Flush the Flow Cell
Correct Leaks
Replace Leak Handling System Parts
Replace the Module Firmware
G4260B 蒸发光散射检测器、G7102A 蒸发光散射检测器的维护
Introduction to Maintenance
与维护相关的安全信息
Cleaning the Module
Inspection of Cables
Drying the Diffuser
清洗雾化器
Cleaning Evaporator Tube
Putting the Instrument into Storage
Updating Detector Firmware
G7179A Assist Interface、G7180A Assist Hub 的维护
与维护相关的安全信息
Overview of Maintenance
清洁模块
Remove and Install the Display Holder
G1170 阀驱动装置和阀头的维护
与维护相关的安全信息
Introduction to Maintenance
Overview of Maintenance
清洁模块
Replacing Parts of the Valve Head
Replacing the Fuses of the Valve Drive
Replace Valve Heads of the G1170A Valve Drive
Replace the Module Firmware
1260 Infinity III SFC 系统的维护
与维护相关的安全信息
清洁模块
Inspection and Preventative Maintenance Intervals
General Maintenance Procedures
base-id: 4073364235
id: 108086395130256139
21-6月-2025
×