Replace the Inlet Valve (G7120A)
适用于
|
所需工具
数量 | 部件号 | 描述 | |
|---|---|---|---|
1 | 
|
| 扳手，14 mm |
1 | | 5067-5688 | 1 - 25 Nm 扭矩扳手，带 14 mm 扳手 |
所需部件
数量 | 部件号 | 描述 | |
|---|---|---|---|
1 | | G4220-60022 | Inlet valve (primary pump head) |
注意
For best performance, lifetime and to avoid leaks, use a torque wrench set to approx. 10 Nm for fixing the inlet valve.
-
Close the shutoff valves to avoid solvent leaks.
-
Unscrew the tubing at the inlet valve.
-
With a 14 mm wrench, unscrew the inlet valve and remove it.
-
Install inlet valve and tighten it at approx. 10 Nm with a torque wrench (14 mm).
-
Attach the inlet tubing to the inlet valve.
-
Open the shutoff valves and purge the system to remove air.
base-id: 4202282507
id: 4202282507