Install the Metering Seal

对于生物兼容性模块，只能使用生物 / 生物兼容部件！

请勿与生物惰性部件混用。

适用于

所需工具

所需部件

数量	部件号	描述
1	0905-1719	PE 密封垫 (for G7167C) OR
1	G7131-20009	生物兼容性密封垫 (for G7137B)
1	5067-5678	柱塞杆，100 µL，氧化锆 (optional) Replacement only necessary in case of wear

数量

部件号

描述

0905-1719

PE 密封垫

(for G7167C)

G7131-20009

生物兼容性密封垫

(for G7137B)

5067-5678

柱塞杆，100 µL，氧化锆 (optional)

Replacement only necessary in case of wear

前提条件

使用插入工具的塑料端安装新的计量密封垫。按下使其固定到位。避免任何偏斜角，因为它可能使密封垫变形。
Close the front door.
In the Local Controller close Change Metering Device.

OR

In the Agilent Lab Advisor software Change Metering Device click Back.
For G4767A, end the procedure with a Pressure Test.
For G7167C and G7137B, proceed with the subsequent steps.
Perform Hydraulic Path Leak Test.
Perform Sampler Leak Test if needed for troubleshooting in case of Hydraulic Path Leak failure.

21-6月-2025