Replacing Parts of the Valve Head

For details about the needed parts and orientation please refer to Valve Drive Parts .

For details about the needed parts and orientation please refer to --- MISSING LINK ---.

Disassembling and reassembling the valve head

生物惰性模块只能使用生物惰性部件！

请勿与生物/生物相容性部件混合使用。

对于生物兼容性模块，只能使用生物 / 生物兼容部件！

请勿与生物惰性部件混用。

适用于

Stator head: Scratches and damage on the inner surface, blockages
Stator face assy: When visibly scratched, or when the valve performance shows indication of leakage or wear
Rotor seal assy: When the valve performance shows indication of leakage or wear

所需工具

数量		部件号	描述
1			Hex key

所需部件

数量		部件号	描述
1			Quick Change Valve Head

警告

有毒、易燃及有害溶剂、样品及试剂

处理溶剂、样品和试剂可能会危害健康安全。

Use the Hex Key to open and remove the Stator Screws from the Stator Head.
Carefully disassemble the necessary Valve Head parts to gain access to the one you want to replace. While doing so please observe the orientation of the parts.
Independent of the part you want to replace always inspect all parts for signs of damage.
Replace the proposed part.

注意
Always mind the correct orientation of the parts and avoid to touch their surfaces.
Turn each of the screws an equal amount until they are finger-tight, then tighten them for another half turn.

21-6月-2025