错误 ID：
Quick Noise Test Evaluation
可能的原因 | 建议采取的措施 | |
|---|---|---|
1 | Insufficient lamp warm-up time. | Allow detector and UV-lamp turned on for at least 2 hours. |
2 | Absorbing solvent or air bubble in flow cell. | Ensure the flow cell is filled with water, and free from air bubbles. |
3 | Dirty or contaminated flow cell. | Flush flow cell Clean the flow cell as described in Clean the Max-Light Cartridge Cell . Clean the flow cell as described in Maintenance of Standard, Semi-Micro or Micro Flow Cell . |
4 | Old UV-lamp. | Exchange the UV-lamp. |
base-id: 3526299147
id: 3526299147