Replace a Lamp
When
|
Tools required
Qty. | p/n | Description | |
|---|---|---|---|
1 | 
|
| Screwdriver, Pozidriv #1 PT3 |
Parts required
Qty. | p/n | Description | |
|---|---|---|---|
1 | | 2140-0820 | Longlife Deuterium lamp “C“ (with black cover and RFID tag) |
1 | | G1103-60001 | Tungsten lamp |
Prerequisites
|
WARNING
Eye damage by detector light
Eye damage may result from directly viewing the light produced by the deuterium lamp used in this product.
- Always turn the deuterium lamp off before removing it.
WARNING
Injury by touching hot lamp
If the detector has been in use, the lamp may be hot.
- If so, wait for lamp to cool down.
NOTE
The lamp house cover includes a magnet.
-
-
-
-
-
NOTE
Do not touch the glass bulb with your fingers. It may reduce the light output.
-
NOTE
Do not touch the glass bulb with your fingers. It may reduce the light output.
-
-
Fasten the lamp screws.
-
-
Place the lamp cables in the lamp cover.
-
-
-
Perform a Wavelength Verification Test or a Holmium Oxide Test to check the correct positioning of the lamp.
-
Perform an Intensity Test.
base-id: 3358909707
id: 9007202613650699