Context Menu

The context menu of the dashboard panel contains the following commands:

	Control	Displays the pump's Control dialog box.
	Method	Displays the pump's Method Setup dialog box.
	Set Error Method	Sets the method that is loaded if an error occurs to the method that is currently available in the hardware.
	Identify Device	Causes the LED on the front of the module to blink for a few seconds.
	Switch Pump On/Off	Toggles the status of the pump, on or off.
	Bottle Fillings	Displays the Bottle Fillings dialog box.
	Prepare Pump...	Displays the Prepare Pump dialog box.
	Flush Filter On/Off	Allows you to flush a clogged inline filter, which is connected to the Multipurpose Valve, see Filter Flush Mode. Use the pump self-test for checking the filter backpressure. Do not use this option if no filter is installed!