The Multipurpose Valve allows easy software-controlled switching between different modes of operation.
In normal operating mode, the flow comes from the pump head, passes the pressure sensor, and arrives at the central port of the Multipurpose Valve. The flow leaves the valve through port 4 to the system (autosampler etc.).
In purge mode, the flow is diverted to the waste container.
In this mode, the flow passes an optional Jet Weaver and the optional inline filter. This configuration is recommended for special applications, which require an increased mixing efficiency.
This mode is used for cleaning the inline filter by back-flushing it. The flow goes to port 5, passes the inline filter in opposite direction, and leaves to the waste through port 7.
CAUTION
Damage to the valve
base-id: 4132436875
id: 4132436875