Configuring Instrument Settings

Path: Settings > Instrument

The Instrument tab on the Settings screen shows the configuration of the instrument and information about the modules. You can change the instrument name and location.

NOTE

Select the connection settings carefully. The default IP configuration may cause network problems in your local area network.

Instrument Configuration

The following settings are available:

Parameter	Description
Name	Shows the name of the instrument.
Name	Displays the Set Instrument Name dialog box, which allows you to change the name. It may contain icons. The name is displayed on the Ambient screen and in the Run Control panel.
Location	Shows the location of the instrument.
Location	Displays the Set Instrument Location dialog box, which allows you to change the location. It may contain icons. The location is displayed on the Ambient screen and in the Run Control panel.
Connection Settings	Shows the IP address of the Assist Hub and its source. (Default): The default IP configuration is used. (Stored): The user-defined IP configuration is used. (DHCP): The automatically assigned IP configuration is used. Or Unknown (DHCP): DHCP is selected, but the DHCP server has not yet assigned the IP configuration. Or No network link <source> if the TCP/IP connection to the intranet network is lost.
Connection Settings	Displays the Connection Settings dialog box, which allows you to change the IP configuration of the Assist Hub. For details on setting up an IP address, see Setting Up the IP Address.
InfinityLab Assist Information	Displays the Instrument Information dialog box that shows the following information: Assist Hub Type ID Assist Hub Serial Number Assist Hub MAC Address Assist Control Software Version

Subpages

21-Jun-2025