Enabling Periodic Seal Wash
The Seal Wash dialog box shows the current seal wash settings. You can set up the seal wash to be run periodically.
- You are using a 1260 Infinity II/III pump with seal wash option available.
To adjust the settings for the Periodic Seal Wash, select
.In the dialog box, enable Periodic Seal Wash.
Enter a value for the duration [min] the seal is purged. The value must be between 0.1 min and 7 min.
Enter a repeat interval [min]. The value must be between 0.2 min and 99 min.
To run the seal wash only once, select the quick action 
Seal Wash Prime on the Status screen or Status details screen.
NOTE
The Seal Wash is available only when a Seal Wash Pump is installed.
The settings apply to the following pumps:
G5654A, G7110B, G7111A, G7111B, G7112B
base-id: 10367722763
id: 10367722763