Grating or Filter Motor Errors

错误 ID： 7800, 7801, 7802, 7803, 7804, 7805, 7806, 7808, 7809, 7810, 7811, 7812, 7813, 7814, 7815, 7816

The motor test has failed.

Test 0 Failed:	Filter motor.
Test 1Failed:	Grating motor.

During the motor tests, the detector moves the motor to the end position while monitoring the end-position sensor. If the end position is not found, the error message is generated.

子页面

可能的原因		建议采取的措施
1	Motor is not connected.	请与您的 Agilent 服务代表联系。
2	Defective motor.	请与您的 Agilent 服务代表联系。
3	Defective/missing grating or filter.	请与您的 Agilent 服务代表联系。
4	Cable/connector defective.	请与您的 Agilent 服务代表联系。