VALVE TAG VIOLATION

错误 ID： 32032

Reading the valve tag failed.

子页面

可能的原因	建议采取的措施
1	A valve head has been exchanged (hot-plugged) while the valve drive was still powered on.	For changing the valve head follow the instructions “Replace Valve Heads.” It is important to have the MCT switched off for at least 10 s after a new valve head has been installed. 请与您的 Agilent 服务代表联系。

可能的原因

建议采取的措施

A valve head has been exchanged (hot-plugged) while the valve drive was still powered on.

For changing the valve head follow the instructions “Replace Valve Heads.” It is important to have the MCT switched off for at least 10 s after a new valve head has been installed.

请与您的 Agilent 服务代表联系。