错误 ID： 7461
The top foam has been removed.
The sensor on the main board detects when the top foam is in place. If the foam is removed while the lamps are on (or if an attempt is made to switch on for example the lamps with the foam removed), the lamps are switched off, and the error message is generated.
可能的原因 | 建议采取的措施 | |
|---|---|---|
1 | The top foam was removed during operation. | 请与您的 Agilent 服务代表联系。 |
2 | Foam not activating the sensor. | 请与您的 Agilent 服务代表联系。 |
base-id: 3284267915
id: 27021601048490891