Remove the Jet Weaver
Tools required
Qty. | p/n | Description | |
|---|---|---|---|
1 |  | 8710-0510 | Open-end wrench 1/4-5/16 inch |
1 | | 8710-0899 | Screwdriver Pozidrive Shaft |
1 | | 5023-2502 | Hex driver SW-6.35, slitted |
Parts required
Qty. | p/n | Description | |
|---|---|---|---|
1 | | 0100-1259 | Plug-Screw 1032- Fitting |
1 | | G4204-04002 | Cover RFID Tag Metal lid for Jet Weaver |
Prerequisites
|
-
Remove capillary connections from the Jet Weaver to the Multipurpose Valve.
-
Plug the valve ports 1 and 2 with two plastic fittings.
-
Open the screw which fixes the Jet Weaver to the front panel.
-
Lift up the Jet Weaver (1) and pull it out of the front panel (2).
If no other Jet Weaver shall be installed, use plastic fittings for closing unused ports of the valve and install the metal lid.
OR
Otherwise continue at Install the Jet Weaver.-
Fix the metal lid to the instrument chassis with a screw.
base-id: 4133622283
id: 9007203388363275