For best performance of the detector
Let the lamp warm-up and stabilize for at least one hour (initial turn on of the module requires a longer time depending on the environment and the application needs); refer to Specification Conditions.
For high sensitivity measurements, a stable environment is required; refer to Environment. Prevent drafts from air condition systems.
Setting an appropriate reference wavelength could improve the baseline behavior.
Do not work with removed/open front panels/doors. When the system includes a G1316 TCC (typically located below the detector) and its front panel is removed while the TCC is set to high temperatures, the up-streaming air could influence the stability of the detector baseline.
base-id: 3526518923
id: 9007202781259915