Specifications of the G7102A Evaporative Light Scattering Detector

Weight

11.0 kg (24.3 lbs non-cooled), 13.3 kg (29.3 lbs cooled)

Dimensions (height × width × depth)

420 x 200 x 450 mm (16.5 x 7.9 x 17.7 inches)

Line voltage

100 – 120 / 220 – 240 V~, ± 10 %

Line frequency

50 or 60 Hz, ± 5 %

Power consumption

150 W, 2A (max)

Ambient operating temperature

10 – 35 °C (50 – 95 °F)

Ambient non-operating temperature

-40 – 70 °C (-40 – 158 °F)

Humidity

< 10 – 80 % r.h at 35 °C (95 °F)

Non-condensing

Operating altitude

Up to 2000 m (6562 ft)

Safety standards: IEC, EN, CSA, UL

Overvoltage category II, Pollution degree 2

For indoor use only

ISM classification

ISM Group 1 Class B

According to CISPR 11

Designed for use with Agilent InfinityLab Assist

Intuitive User Interface,
Automated Workflows,
Predictive Maintenance &
Assisted Troubleshooting

Light Source

LASER 405 nm, 10 mW (Class 3B)

Detector

Dual PMT with digital signal processing

Nebulizer

OFF, 25 – 90 °C

Evaporator

Non-cooled

OFF, 25 – 120 °C

Cooled

OFF, 10 – 80 °C

Gas Flow Range

0.9 – 3.25 SLM (controlled gas shut-off)

Dynamic Range

Up to 4  orders of magnitude

Short Term Noise

< 0.1 LSU/h

See conditions in Reference conditions

Drift

< 1 LSU/h

See conditions in Reference conditions

Operating Pressure

4.1 – 6.9 bar (60 – 100 psi)

Eluent Flow Range

0.2 – 5.0 mL/min

Digital Output

10, 40 or 80 Hz ( 24 bit)

Remote Operation

Remote Start Input

Communication

Ethernet

Serial (RS232)

Remote Start Input

Pump Stop: 1 Contact closure

Instrument Control

ELSD driver for OpenLab CDS

ELSD driver for OpenLab ChemStation edition

ELSD driver for OpenLab EZChrom edition

LC and CE Drivers Rev. A.02.11 or above for ICF

InfinityLab Assist (G7180A) with firmware D.07.40 or above not supported!

Safety and maintenance

Gas shut-off Valve, Leak Detection, Laser Interlock