Specifications

Weight

14.5 kg (32 lbs)

Dimensions (height × width × depth)

180 x 396 x 436 mm (7.1 x 15.6 x 17.2 inches)

Line voltage

100–240 V~, ±10%

Wide-ranging capability

Line frequency

50 or 60 Hz, ±5%

Power consumption

80 VA, 65 W

Ambient operating temperature

4–55 °C (39–131 °F)

Ambient non-operating temperature

-40–70 °C (-40–158 °F)

Humidity

< 95% r.h. at 40 °C (104 °F)

Non-condensing

Operating altitude

Up to 3000 m (9842 ft)

Safety standards: IEC, EN, CSA, UL

Overvoltage category II, Pollution degree 2

For indoor use only

ISM Classification

ISM Group 1 Class B

According to CISPR 11

Hydraulic system

Dual piston in series pump with servo-controlled variable stroke drive, power transmission by gears and ball screws, floating pistons

Designed for use with Agilent InfinityLab Assist

Intuitive User Interface, Automated Workflows, Predictive Maintenance & Assisted Troubleshooting

Flow range

Settable: 0.001 – 10 mL/min

Recommended: 0.2 – 10.0 mL/min

Set points in 0.001 mL/min increments

For use with flow rates below 500 μL/min a vacuum degasser is required.

Flow precision

≤ 0.07 % RSD, or <0.02 min SD, whichever is greater

Based on retention time at constant temperature

Flow accuracy

± 1 % or 10 µL/min, whichever is greater

Pumping degassed H₂O at 10 MPa (100 bar, 1450 psi)

Pressure operating range

Up to 60 MPa (600 bar, 8702 psi) up to 5 mL/min

Up to 20 MPa (200 bar, 2901 psi) up to 10 mL/min

Pressure pulsation

< 2 % amplitude (typically < 1.3 %), or < 0.3 MPa (3 bar, 44 psi), whichever is greater

At 1 mL/min isopropanol, at all pressures > 1 MPa (10 bar, 145 psi)

Compressibility compensation

User-selectable, based on mobile phase compressibility

Recommended pH range

1.0 – 12.5 

Solvents with pH < 2.3  should not contain acids which attack stainless steel

Integrated degassing unit

Optional

Number of channels: 2

Internal volume per channel: 1.5 mL

Instrument Control

LC & CE Drivers A.02.14 or above

Instrument Control Framework (ICF) A.02.04 or above

Lab Advisor B.02.08 or above

InfinityLab Assist (G7180A) with firmware D.07.40 or above

Instant Pilot (G4208A) with firmware B.02.20 or above

For details about supported software versions refer to the compatibility matrix of the LC & CE Drivers version in use

Communication

Controller Area Network (CAN)

Enhanced Remote Interface (ERI)

Local Area Network (LAN)

Universal Serial Bus (USB)

Safety and maintenance

Extensive diagnostics, error detection and display through Agilent Lab Advisor, leak detection, safe leak handling, leak output signal for shutdown of the pumping system.

Low voltage in major maintenance areas.

GLP features

Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of seal wear and volume of pumped mobile phase with pre-defined and user settable limits and feedback messages. Electronic records of maintenance and errors

Housing

All materials are recyclable