Specifications of the G7129A Vialsampler

Weight

19 kg (41.9 lbs)

w/o sample thermostat

Dimensions (height × width × depth)

320 x 396 x 468 mm

(12.8 x 15.6 x 18.4 inches)

Line voltage

100–240 V~, ±10%

Wide-ranging capability

Line frequency

50 or 60 Hz, ±5%

Power consumption

350 VA, 350 W, 1195 BTU/h

Ambient operating temperature

4–40 °C (39–104 °F);

without sample thermostat up to 55 °C (131 °F)

Ambient non-operating temperature

-40–70 °C (-40–158 °F)

Humidity

< 95% r.h. at 40 °C (104 °F)^{SampleThermostatIncluded}

Non-condensing

Operating altitude

Up to 3000 m (9842 ft)

Safety standards: IEC, EN, CSA, UL

Overvoltage category II, Pollution degree 2

For indoor use only

ISM Classification

ISM Group 1 Class B

According to CISPR 11

Permitted solvents

Boiling point ≥ 56 °C (133 °F)

Auto-ignition temperature ≥ 200 °C (392 °F)

Designed for use with Agilent InfinityLab Assist

Intuitive User Interface, Automated Workflows, Predictive Maintenance & Assisted Troubleshooting

Injection range

0.1 – 100 µL in 0.1 µL increments with 100 µL up to 60 MPa

0.1 – 900 µL in 0.1 µL increments with 900 µL up to 40 MPa

Up to 1800 µL with multiple draw (hardware modification required)

Requires 900 µL analytical head

Injection precision

< 1 % RSD of peak areas from 1 - 5 µL

< 0.25 % RSD of peak areas from 5 µL to 100 µL

Measured caffeine

Injection linearity

R² > 0.9999

Injection accuracy

< ± 1 %

Pressure range

0 – 60 MPa (0 – 600 bar, 0 – 8702 psi)

0 – 40 MPa (0 – 400 bar, 0 – 5801 psi)

For 900 µL analytical head

Sample viscosity range

0.2 – 5.0 cP

Sample capacity

132 x 2 mL vial (two trays default)

100 x 2 mL vial (two classic trays optional)

36 x 6 mL vials (two trays optional)

Carryover

< 0.004 % (40 ppm) with needle wash

Sample: Chlorhexidine

Injection cycle time

18 s for draw speed 200 µL/min

Ejection speed: 200 µL/min

Injection volume: 1 µL

Minimum sample volume

1 µL from 5 µL sample in 100 µL microvial, or

1 µL from 10 µL sample in 300 µL microvial.

Needle height offset has to be adapted to ensure that needle doesn’t touch vial bottom.

Default needle height = 0 equates to 2 mm above the vial bottom.

Instrument Control

LC & CE Drivers A.02.12 or above

Instrument Control Framework (ICF) A.02.03 or above

Lab Advisor B.02.07 or above

InfinityLab Assist (G7180A) with firmware D.07.40 or above

Instant Pilot (G4208A) with firmware B.02.19 or above

For details about supported software versions refer to the compatibility matrix of your version of the LC & CE Drivers

Communication

Controller Area Network (CAN),Local Area Network (LAN)

ERI: ready, start, stop and shut-down signals

Maintenance and safety-related features

Extensive diagnostics, error detection and display with Agilent InfinityLab Assist or with Agilent Lab Advisor software.

Leak detection, safe leak handling, leak output signal for shutdown of pumping system, and low voltages in major maintenance areas.

GLP features

Early maintenance feedback (EMF) for continuous tracking of instrument usage with user-settable limits and feedback messages. Electronic records of maintenance and errors.

Housing

All materials recyclable.