The instrument can be configured from the front panel submenu (see Submenu Screen), to start in either RUN or STANDBY mode when the unit is switched on via the rear power button.
To configure the Power Mode, select the required Status Mode (i.e. STANDBY or RUN) you wish the unit to start from the submenu screen (see Submenu Screen). The selected option will take effect the next time the module is power cycled. If RUN mode is selected as the desired Power mode, then the instrument will use the operating parameters stored in memory. In the unlikely event that the instrument encounters a fault during power-up, the unit will automatically switch to STANDBY mode.
base-id: 4344676363
id: 4344676363