Context Menu

The context menu of the dashboard panel contains the following commands:

	Control	Displays the pump's Control dialog box.
	Method	Displays the pump's Method Setup dialog box.
	Set Error Method	Sets the method that is loaded if an error occurs to the method that is currently available in the hardware.
	Identify Device	Causes the LED on the front of the module to blink for a few seconds.
	Switch Pump On/Off	Toggles the status of the pump, on or off.
	Switch solvent selection Valve A	allows you to switch the solvent inlet line for channel A from inlet line 1 to 2.
	Bottle Fillings	Displays the Bottle Fillings dialog box.
	Prepare Pump	Allows you to control the Purge, Condition or the Prime function.
	Seal Wash Purge	Allows you to refill the Seal Wash lines once the Seal Wash solvent has been changed.