The Pump User Interface (Dashboard Panel)
Module Graphic
The items in the pump graphic have the following meaning and function:
|
|
Indicates that an External Contacts board is installed. |
|
| The level of solvent in the bottle is denoted by the green area; when the solvent level falls below the specified volume, the area turns yellow; when the bottle is empty, the area turns red. Clicking on the solvent bottle displays the Bottle Fillings dialog box. The tooltip for the bottle shows the solvent name. |
|
|
Indicates that the ISET option is installed but with no active method (light gray) or installed and active (dark gray). |
|
|
Indicates the presence of a solvent selection valve. Click the graphic to switch the valve; the animation shows when the valve is switched. |
|
| The pressure setpoints. The red line shows the current maximum pressure limit; the gray area shows the current pressure (also shown as text). |
The current solvent flow rate (in mL/min) is displayed above the pressure display.
Instrument Signals
The following pump signals are displayed:
| Flow | The current solvent flow rate (in mL/min). |
| Pressure | The current pump ressure (in bar, psi or MPa, see Instrument Configuration). |
| Pressure Limit | The current maximum pressure limit. |
| Composition A:B | The current solvent composition. When a solvent selection valve is fitted, the channels are shown in the graphic. |
|
Tuning |
The signal represents the current effort the pump needs to maintain the current system settings. |
Subpages
base-id: 4202931979
id: 4202931979