Slit Test
The slit test verifies correct operation of the micromechanical slit.
During the test, the slit is moved through all slit positions while the detector monitors the lamp intensity change. When the slit position is changed, the intensity drop (move to smaller slit) or intensity increase (move to larger slit) must be within a defined range.
If the test is performed with the flow cell removed, the test results are not influenced by solvent or pump effects.
If the intensity changes are outside the expected range, the test fails.
When
|
Parts required
Qty. | p/n | Description | |
|---|---|---|---|
1 | 
|
| Removed Flow Cell |
Prerequisites
|
Run the Slit Test with the Agilent Lab Advisor (for further information see Online-Help of user interface).
Figure: Slit Test – Results 
Figure: Slit Test – Signal
Subpages
base-id: 3358473483
id: 3358473483