The Edit Columns dialog box, which you access using the Columns command of the Instrument menu in Method and Run Control view, shows the detailed information about the columns attached to each position in the device. The table contains all the column-specific information stored in the column ID tags (see Column Tag Information) plus the following possible additional columns:
Installed | YES when the column is installed in a device. no when the column is not installed in a device. |
Location | Shows the location in the device to which the plumbing of the valve position leads. |
Dev. Serial# | Present only for a valve thermostat cluster. Shows the serial number of the device that contains the column. |
Tag | Shows if the column has column ID tag (Used), if it sealed (Sealed) or the column has no tag (empty). |
The table includes not only the columns that are installed in the column thermostat device(s), but also the inventory of other available columns, for example, columns that have been used in the past. The ChemStation also provides a catalog of column types, which you can load into the Edit Columns table to act as templates for other columns.
base-id: 3001882379
id: 3001882379-1