Connecting the Column ID Tags

If the column has no Column ID Tag, fit a tag by slipping the loop over one end of the column and pulling it tight through the plastic holder.

NOTE
Once the loop has been pulled tight, the tag can no longer be removed from the column.
Install the column in the column compartment, see Exchange a Column.
Plug the free end of the Column ID Tag into the adjacent socket in the column tag reader unit.

NOTE
It is important that the Column ID Tag is plugged into the adjacent socket in a logical order (that is, first column from the top into "1", second column from the top into "2", and so on). Otherwise, it is easy to confuse the columns and their locations during column assignment in a CDS.

NOTE

If you have a full-length column, we recommend that you use the adjacent socket on the left column tag reader.