The module dimensions and weight (for specifications, see reference below) allow you to place the module on almost any desk or laboratory bench. It needs an additional 2.5 cm (1.0 inches) of space on either side and approximately 8 cm (3.1 inches) in the rear for air circulation and electric connections
If the bench shall carry a complete HPLC system, make sure that the bench is designed to bear the weight of all modules.
The module should be operated in a horizontal position, especially if a Sample Thermostat is installed. Use a bubble level to check the leveling of the sampler.
NOTE
Agilent recommends that you install the HPLC instrument in the InfinityLab Flex Bench rack. This option helps to save bench space as all modules can be placed into one single stack. It also allows to easily relocate the instrument to another lab.
WARNING
Heavy weight
The module is heavy.
The specifications of the module are described in:
base-id: 3755496331
id: 27021601519719307