This procedure describes the change of the TCP/IP settings on your PC to match the module’s default parameters in a local configuration (see Using default parameters).
The individual steps may vary depending on the operating system. Below you can find the steps to set up a static IP address in Windows 11.
Navigate to the settings on your PC (Windows Start menu > Settings).
Under Network and internet, select Ethernet.
In section IP assignment, click Edit.
To edit the IP settings, select Manual from the drop-down list.
Enable (toggle) the IPv4 connection and enter the following IP address settings:
Save your configuration settings.
base-id: 11654715659
id: 11654715659