Environment

Your module will work within specifications at ambient temperatures and relative humidity as described in:

规格
规格

ASTM drift tests require a temperature change below 2 °C/hour (3.6 °F/hour) over one hour period. Our published drift specification is based on these conditions (refer to Specifications). Larger ambient temperature changes will result in larger drift.

Better drift performance depends on better control of the temperature fluctuations. To realize the highest performance, minimize the frequency and the amplitude of the temperature changes to below 1 °C/hour (1.8 °F/hour). Turbulences around one minute or less can be ignored.

小心

模块内的冷凝水

冷凝水可能会损坏系统电子元件。

在温度波动可能导致模块内出现冷凝的情况下，请勿存放、运输或使用模块。
如果模块在寒冷天气下运输，请不要马上开箱，让它缓慢升至室温，以避免出现冷凝现象。