Install the Column Identification Option
所需部件
数量 | 部件号 | 描述 | |
|---|---|---|---|
1 |  | 5067-5915 | Column ID Kit Left |
1 | | 5067-5916 | Column ID Kit Right |
1 | | 5067-5917 | InfinityLab 色谱柱识别标签 |
前提条件
|
小心
Electronic boards and components are sensitive to electrostatic discharge (ESD).
ESD can damage electronic boards and components.
- Be sure to hold the column ID modules by the plastic parts, and do not touch the electrical components. Do not touch the pins of the flex-board connector.
注意
In the Agilent 1260 Infinity III Multicolumn Thermostat (G7116A), the column ID module is installed on the left side of the MCT only.
-
Remove any tube guides and tube clip holders that may already be installed on the sides of the MCT cover.
-
Repeat steps 4 to 9 for the column ID module on the other side (for G7116B, on the right).
Install the waste tube clip holder (example shows a G7116B).
base-id: 3001861771
id: 9007202256602763