The module dimensions and weight (for specifications, see reference below) allow you to place the module on almost any desk or laboratory bench. It needs an additional 2.5 cm (1.0 inches) of space on either side and approximately 8 cm (3.1 inches) in the rear for air circulation and electric connections
If the bench shall carry a complete HPLC system, make sure that the bench is designed to bear the weight of all modules.
The module should be operated in a horizontal position, especially if a Sample Thermostat is installed. Use a bubble level to check the leveling of the sampler.
注意
Agilent 建议将 HPLC 仪器安装在 InfinityLab Flex Bench 架子中。因为所有模块都可以叠放在一起，所以该选项有助于节省工作台空间。也方便仪器移至另一个实验室。
警告
很重
模块很重。
The specifications of the module are described in:
base-id: 3755496331
id: 27021601519719307