Preparar um amostrador com termostato para transporte

Quando

The module needs to be transported or relocated.

ADVERTÊNCIA

Heavy weight

The module is heavy.

Carry the module at least with 2 people.
Avoid back strain or injury by following all precautions for lifting heavy objects.
Ensure that the load is as close to your body as possible.
Ensure that you can cope with the weight of your load.

CUIDADO

Condensação dentro do módulo

Danos nos componentes eletrônicos do módulo

Depois da instalação do termostato da amostra, aguarde, no mínimo, 30 min para ligar o módulo.
Certifique-se de que não exista condensação no interior do módulo.

CUIDADO

Unsecured transportation

Mechanical damage

Secure the sampler handler assembly before transporting the sampler.

NOTA

Moving the sampler with the Sample Thermostat installed is possible for short distances (for example, from one workbench to another). For longer transportation, remove the thermostat from the sampler and handle the units separately.

Remove condensate.
1. Place a suitable container underneath the outlet pipe.
1. Remove the drainage tube.
1. Gently tap the sides of the sampler several times to facilitate the drainage of the condensate from the system.
NOTA
Do not tilt the module to avoid damage to the internal parts.
Remove all sample containers from the sample hotel.
Move the robot arm to the park position using Instant Pilot or Lab Advisor, see Arm Position.
Turn off the sampler.
Install all parts of the Transport Protection, see Install the Transport Protection Foam.
Remove the Sample Thermostat from the sampler if needed, see Substituir o termostato da amostra.

21-jun-2025