Remove the Jet Weaver

必要なツール

数量	部品番号	説明
1	8710-0510	スパナ、1/4 - 5/16 インチ
1	8710-0899	Screwdriver Pozidrive Shaft
1	5023-2502	六角ドライバー SW-6.35、スリット入り

必要な部品

数量		部品番号	説明
1		0100-1259	Plug-Screw 1032- Fitting
1		G4204-04002	Cover RFID Tag Metal lid for Jet Weaver

数量

部品番号

説明

0100-1259

Plug-Screw 1032- Fitting

G4204-04002

Cover RFID Tag

Metal lid for Jet Weaver

前提条件

Remove capillary connections from the Jet Weaver to the Multipurpose Valve.
Plug the valve ports 1 and 2 with two plastic fittings.
Open the screw which fixes the Jet Weaver to the front panel.
Lift up the Jet Weaver (1) and pull it out of the front panel (2).
If no other Jet Weaver shall be installed, use plastic fittings for closing unused ports of the valve and install the metal lid.

OR
Otherwise continue at Install the Jet Weaver.
Fix the metal lid to the instrument chassis with a screw.