エラー ID： 2016
The pressure signal is missing.
The pressure signal must be within a specific voltage range. If the pressure signal is missing, the processor detects a voltage of approximately -120 mV across the damper connector.
The pressure signal must be within a specific voltage range. If the pressure signal is missing, the processor detects a voltage of approximately -120 mV across the pressure sensor.
考えられる原因 | 対策 | |
|---|---|---|
1 | Damper disconnected. | Agilent サービス担当者までお問い合わせください。 |
2 | Pressure sensor disconnected. | Agilent サービス担当者までお問い合わせください。 |
3 | Defective damper. | Agilent サービス担当者までお問い合わせください。 |
4 | Defective pressure sensor. | Agilent サービス担当者までお問い合わせください。 |
base-id: 3820915339
id: 9007203075656331