Connect a Column Identification Tag to the Tag Reader
必要なツール
数量 | 部品番号 | 説明 | |
|---|---|---|---|
2 |  | 8710-0510 | スパナ、1/4 - 5/16 インチ |
必要な部品
数量 | 部品番号 | 説明 | |
|---|---|---|---|
1 | | 5067-5917 | InfinityLab カラム ID タグ |
1 |
|
| カラム（最長 30 cm） |
前提条件
|
If the column is without a preinstalled identification tag, fit a new tag onto it by slipping the lanyard loop over one end of the column and pulling the cord tight through the plastic holder.
注記
Once the lanyard is fixed, the tag can no longer be removed from the column.
Install the column in the ICC (see ICC へのカラムの取り付け).
-
Route the cord to the left and plug the column identification tag into the corresponding socket of the tag reader.
-
-
-
Configure the connected column with identification tag in the CDS, see Column Assignment and Using Column Identification Tags.
base-id: 3714867467
id: 9007202969608459