エラー ID： 82
The leak sensor in the module has failed (short circuit).
The current through the leak sensor is dependent on temperature. A leak is detected when solvent cools the leak sensor, causing the leak sensor current to change within defined limits. If the current increases above the upper limit, the error message is generated.
考えられる原因 | 対策 | |
|---|---|---|
1 | Defective leak sensor. | Agilent サービス担当者までお問い合わせください。 |
2 | Leak sensor incorrectly routed, being pinched by a metal component. | Agilent サービス担当者までお問い合わせください。 |
3 | On/Off switch assembly defective. | Agilent サービス担当者までお問い合わせください。 |
4 | Cable or contact problem. | Agilent サービス担当者までお問い合わせください。 |
base-id: 3002453003
id: 63050397785639947