Lamp Ignition Failed

エラー ID： 7452

The lamp failed to ignite. The processor monitors the lamp current during the ignition cycle. If the lamp current does not rise above the lower limit within 2 – 5 s, the error message is generated.

サブページ

考えられる原因		対策
1	Lamp too hot. Hot gas discharge lamps may not ignite as easily as cold lamps.	Switch off the lamp and allow it to cool down for at least 15 minutes.
2	Lamp disconnected.	Ensure the lamp connector is seated firmly. Ensure the lamp is connected.
3	Defective or non-Agilent lamp.	ランプを交換します。
4	Defective UV lamp or non-Agilent lamp.	UV ランプを交換します。
5	Defective power supply.	Agilent サービス担当者までお問い合わせください。
6	Defective mainboard.	Agilent サービス担当者までお問い合わせください。