Specifications of the Sample ID Reader

**Table:** Physical specifications of the Sample ID Reader (G7167-68110)
Type	Specification	Comments
Weight	2.0 kg (4.4 lbs)	Sample ID Reader without packaging
Dimensions (height x width x depth)	52 x 152 x 354 mm
Supply Voltage	24 V
Power consumption	20 W
Ambient operating temperature	4–40 °C (39–104 °F)
Ambient non-operating temperature	-20–60 °C (-4–140 °F)
Humidity	< 95 % r.h. at 40 °C (104 °F)	Non-condensing
Operating altitude	Up to 3000 m (9842 ft)
Safety standards IEC, EN, CSA, UL	Overvoltage Category II (in combination with the end-use product), Pollution degree 2	For indoor use only
ISM Classification	ISM Group 1 Class B	According to CISPR 11

**Table:** Performance specifications of the Sample ID Reader
Type	Specification	Comments
Instrument control	LC & CE Drivers Rev. 3.8.11 or above LC Firmware Rev. D.07.41 or above One of the following control software packages or higher is required: OpenLab CDS 2.8, OR OpenLab ChemStation LTS 01.11 + Update 3, OR MassHunter for LC/QTOF 12.1, OR MassHunter for LC/TQ 12.2
Supported Parts/Accessories	2 mL Vials with barcode (e.g. p/n 5182-0716-ID) 40-Vial-Rack Sample ID (p/n 5431-0068) Palette Sample ID (p/n G7167-60205)

**Table:** Minimum system requirements for the Sample ID Reader
Type	Specification
LC driver	LC & CE Drivers Rev. 3.8.11 or above
Firmware	LC Firmware Rev. D.07.41 or above
Software	One of the following control software packages or higher is required: OpenLab CDS version 2.8^{Minimum version for full functionality.} OR OpenLab ChemStation LTS 01.11 + Update 3 OR MassHunter for LC/QTOF 12.1 OR MassHunter for LC/TQ 12.2

^[1]Minimum version for full functionality.