Replace the Rotor Seal
When
|
Tools required
Qty. | p/n | Description | |
|---|---|---|---|
1 |  | 8710-0510 | Open-end wrench 1/4-5/16 inch |
1 | | 8710-2394 | Hex key 9/64 inch 15 cm long T-handle |
1 |
|
| Cleaning tissue and appropriate solvent like isopropanol or methanol |
Parts required
Qty. | p/n | Description | |
|---|---|---|---|
1 | | 5068-0279 | Rotor Seal, 3-position/6-port FI Valve OR |
1 | | 5068-0280 | Stator replacement only necessary in case of wear |
CAUTION
Reduced life time of the injection valve
Component cleanliness is crucial for the life time of the injection valve.
- Replace the rotor seal in a clean environment.
NOTE
Please bear in mind that depending on which valve you have installed the images may slightly differ from the actual item.
-
-
-
-
-
-
-
-
-
Install the waste line (if applicable).
-
-
Perform a Pressure Test.
base-id: 5919934603
id: 9007205174675595