With an operating pressure of up to 600 bar the Quaternary Pump is compatible with HPLC and UHPLC, i.e. handling 2.1 , 3 , and 4.6 mm ID columns over the flow rate range (up to 5 mL/min) and semi preparative analysis due to flow up to 10 mL/min.
Ultralow carryover – The Multisampler is designed for low carryover, you can take clean to a whole new level with the multi-wash capability, cleaning all relevant injection parts between runs. This sophisticated, integrated feature flushes the injection needle outside with three solvents, and uses seat back flush procedures to reduce carryover to less than 9 ppm.
Dual-needle injection – By running samples alternately through one or the other injection path, you can reduce cycle times to mere seconds, virtually eliminating conventional wait times—whether for large volume loadings or flushing procedures.
Higher sample capacity per benchspace – Using shallow well-plate drawers, the Multisampler takes a maximum load of 16 microtiter plates and up to 6144 samples—the most of any single system.
Advanced column capacity for up to 4 columns in a single Multicolumn Thermostat delivering best flexibility for column switching.
Fast and easy connections with InfinityLab Quick Connect fittings to save time and trouble.
DAD HS Detector delivers lower detection limit and higher data quality for more confidence.
Seamless integration in your chromatography data system: Agilent’s Instrument Control Framework (ICF) enables smooth control of Agilent LC instrumentation through third-party chromatography data systems.
Equipped with InfinityLab Assist - adds an Intuitive User Interface, Automated Workflows, Predictive Maintenance and Assisted Troubleshooting.
base-id: 4531378059
id: 9007203786119051