Error ID: 2244, 8053
This error is thrown, if the degasser does not become ready after 8 min, i.e. is higher than 180 mbar.
Degasser is not ready within 8 min after startup, because the pressure inside the vacuum chamber exceeds 120 mbar.
Probable cause | Suggested actions | |
|---|---|---|
1 | Liquid in degasser tubing. | Please contact your Agilent service representative. |
2 | Leak in degasser tubing or chamber. | Please contact your Agilent service representative. |
3 | Degasser vacuum pump defect. | Please contact your Agilent service representative. |
base-id: 3821319691
id: 9007203076060683