Error ID: 2205, 2215, 2505
Index Missing: Pump channel A
B: Index Missing: Pump channel B
The encoder index position in the module was not found during initialization.
During initialization, the first piston is moved to the mechanical stop. After reaching the mechanical stop, the piston reverses direction until the encoder index position is reached. If the index position is not recognized within a defined time, the error message is generated.
Probable cause | Suggested actions | |
|---|---|---|
1 | Disconnected or defective encoder cable. | Please contact your Agilent service representative. |
2 | Defective pump drive assembly. | Please contact your Agilent service representative. |
base-id: 3821051787
id: 9007203075792779