It is necessary to perform periodic inspection of the instrument to ensure its safe use. It is possible to have these periodic inspections performed by Agilent service representatives on a contractual basis. For information regarding the maintenance inspection contract, contact your Agilent representative.
On the following pages maintenance procedures are described that can be carried out without opening the main cover.
Procedure | Typical Frequency | Notes |
|---|---|---|
|
Flow cell flushing |
If flow cell is contaminated. |
|
|
Leak sensor drying |
If leak has occurred. |
Check for leaks. |
|
Leak handling System replacement |
If broken or corroded. |
Check for leaks. |
|
Replacing the detector’s Firmware |
If not up to date or corrupted. |
|
base-id: 3596194187
id: 9007202850935179