Lamp and Flow Cell RFID Tag

The detector is equipped with a UV lamp and flow cell identification system using RFID (radio frequency identification) tags attached to the assemblies and RFID tag readers at the optical unit. The table below lists all parameters stored in the RFID tag.

**Table:** RFID Tag Data
Lamp information	Flow cell information
product number	product number
serial number	serial number
production date	production date
accumulated UV on time (in hours)	nominal path length of the cell (in mm)
actual UV lamp on time (in hours)	cell volume (σ) in µL
number of ignitions	maximum pressure (in bar)
date of last intensity test	date of last cell test

NOTE

The pressure value is always displayed in bar, even if the user interface uses other units, e.g. PSI.