Error ID: 7800, 7801, 7802, 7803, 7804, 7805, 7806, 7808, 7809, 7810, 7811, 7812, 7813, 7814, 7815, 7816
The motor test has failed.
Test 0 Failed: | Filter motor. |
Test 1Failed: | Grating motor. |
During the motor tests, the detector moves the motor to the end position while monitoring the end-position sensor. If the end position is not found, the error message is generated.
Probable cause | Suggested actions | |
|---|---|---|
1 | Motor is not connected. | Please contact your Agilent service representative. |
2 | Defective motor. | Please contact your Agilent service representative. |
3 | Defective/missing grating or filter. | Please contact your Agilent service representative. |
4 | Cable/connector defective. | Please contact your Agilent service representative. |
base-id: 3401212683
id: 9007202655953675