Prep Flow Cell - Quartz
NOTE
For more details on the Preparative Flow Cells refer to the technical note that comes with the flow cells.
Parts list
p/n | Description | ||
|---|---|---|---|
|  | G1315-60017 | Prep flow cell quartz, 0.3 mm, 20 bar (2 MPa) |
| | G1315-60018 | Prep flow cell quartz, 0.06 mm (2 MPa) |
1 | | 0515-1056 | Screw M 2.5, 4 mm lg for cell body/clamp |
2 | | G1315-84902 | Handle for Clamp unit |
3 | | G1315-84901 | Clamp unit |
4 | | G1315-80004 | Quartz body - Prep Cell 0.3 mm |
4 | | G1315-80003 | Quartz body - Prep Cell 0.06 mm |
5 | | G1315-67302 | PTFE tubing 80 cm length, 0.5 mm i.d., o.D. 1.6 mm |
6 | | G1315-27705 | Cell housing |
7 | | G1315-67301 | PTFE tubing 2 m length, 0.8 mm i.d., o.D. 1.6 mm |
| | 0100-1516 | Finger-tight fitting PEEK, 2/pk |
NOTE
The flow cell comes with two tubings 0.8 mm i.d. and one 0.5 mm i.d. so that the combination at the flow cell could be either 0.8 /0.8 or 0.5 /0.8 (inlet/outlet).
Standard is 0.8 /0.8 . Depending on the system pressure (<30 mL/min) or bandbroadening, the inlet tubing might be changed to 0.5 mm.
base-id: 3359110923
id: 9007202613851915