VALVE TAG VIOLATION

Error ID: 32032

Reading the valve tag failed.

Subpages

Probable cause	Suggested actions
1	A valve head has been exchanged (hot-plugged) while the valve drive was still powered on.	For changing the valve head follow the instructions “Replace Valve Heads.” It is important to have the MCT switched off for at least 10 s after a new valve head has been installed. Please contact your Agilent service representative.

Probable cause

Suggested actions

A valve head has been exchanged (hot-plugged) while the valve drive was still powered on.

For changing the valve head follow the instructions “Replace Valve Heads.” It is important to have the MCT switched off for at least 10 s after a new valve head has been installed.

Please contact your Agilent service representative.