Install the Column Identification Option

Parts required

Qty.	p/n	Description
1	5067-5915	Column ID Kit Left
1	5067-5916	Column ID Kit Right
1	5067-5917	InfinityLab Column Identification Tag

Prerequisites

CAUTION

Electronic boards and components are sensitive to electrostatic discharge (ESD).

ESD can damage electronic boards and components.

Be sure to hold the column ID modules by the plastic parts, and do not touch the electrical components. Do not touch the pins of the flex-board connector.

NOTE

In the Agilent 1260 Infinity III Multicolumn Thermostat (G7116A), the column ID module is installed on the left side of the MCT only.

Remove any tube guides and tube clip holders that may already be installed on the sides of the MCT cover.
Repeat steps 4 to 9 for the column ID module on the other side (for G7116B, on the right).
Install the waste tube clip holder (example shows a G7116B).