Agilent User Information System

Click here to see this page in full context

Home >
Installation >
Site Requirements and Specifications >
Site Requirements and Specifications of the G7179A InfinityLab Assist Interface, G7180A InfinityLab Assist Hub >
Site Requirements >
Power Cords

Power Cords

Country-specific power cords are available for the module. The female end of all power cords is identical. It plugs into the power-input socket at the rear. The male end of each power cord is different and designed to match the wall socket of a particular country or region.

Agilent makes sure that your instrument is shipped with the power cord that is suitable for your particular country or region.

WARNING

Unintended use of power cords

Using power cords for unintended purposes can lead to personal injury or damage of electronic equipment.

Never use a power cord other than the one that Agilent shipped with this instrument.
Never use the power cords that Agilent Technologies supplies with this instrument for any other equipment.
Never use cables other than the ones supplied by Agilent Technologies to ensure proper functionality and compliance with safety or EMC regulations.

WARNING

Absence of ground connection

The absence of ground connection can lead to electric shock or short circuit.

Never operate your instrumentation from a power outlet that has no ground connection.

WARNING

Electrical shock hazard

Solvents may damage electrical cables.

Prevent electrical cables from getting in contact with solvents.
Exchange electrical cables after contact with solvents.

base-id: 3001783179

id: 9007202256524171-17

21-Jun-2025

×