Installing the Display Holder
WARNING
Risk of injury due to extended positioning of the holder in stand-by mode
If the arm of the holder is extended, there is a risk of catching on the Assist Interface. People passing by can get injured and the Assist Interface or other parts of the stack can be damaged. Solvent bottles in the solvent cabinet or the InfinityLab Level Sensing module above the Assist Hub can fall down if they are exposed to mechanical shocks.
- After use, return the Assist Interface to the home position: Move the Assist Interface to the highest position against the solvent cabinet or InfinityLab Level Sensing module.
CAUTION
Improper installation of Display Holder
If the Display Holder with the attached Assist Interface is not properly inserted into the Assist Hub, the Assist Interface may fall out and get damaged.
- Install the Display Holder correctly on the Assist Hub according to the instructions.
Insert the Display Holder into the Assist Interface.
CAUTION
Improper installation of the Assist Interface
If the Assist Interface does not properly click into the Display Holder, then there is a risk of personal injury due to the Assist Interface falling down.
- Install the Assist Interface correctly.
NOTE
If you insert the Display Holder correctly, you will hear a click when it snaps into the Assist Interface.
Insert the Assist Interface and Display Holder into the Assist Hub garage.
NOTE
If you insert the Display Holder correctly, you will hear a click when it snaps into the Assist Hub.
The Assist Interface can be moved into a variety of positions during use. After use, return the Assist Interface to the home position.
base-id: 7797137675
id: 7797137675