Connecting the Waste system to the SFC control module BPR Outlet
Parts required
Qty. | p/n | Description | |
|---|---|---|---|
1 |  | G4301-68715 | SFC System Accessory Kit (delivered with the module) |
NOTE
Proper system operation requires adequate space in the waste bottle to allow gaseous exit. It is the responsibility of the operator to ensure that the waste bottle is empty before beginning operation of the SFC control module, and to monitor and empty the waste bottle as needed during usage.
WARNING
Exposure to toxic substances
- The vapor exiting the module may contain several percent organic solvent. The effluent should NEVER be vented directly into an enclosed space occupied by humans because of the potential for long-term exposure to toxic substances.
-
Connect the fitted end of the SFC control module waste line to the outlet union on the backpressure regulation (BRP).
-
Insert the SFC control module waste line into the waste bottle though the waste bottle cap.
-
Attach the Tygon vent tubing to the waste bottle and route to an appropriate vent.
-
-
base-id: 5919907339
id: 5919907339