Error ID: 68
Depending on the module, assemblies (e.g. the lamp in the detector) are turned off to assure that the module does not overheat inside.
Probable cause | Suggested actions | |
|---|---|---|
1 | Fan cable disconnected. | Please contact your Agilent service representative. |
2 | Defective fan. | Please contact your Agilent service representative. |
3 | Defective sampler fan. | Please contact your Agilent service representative. |
4 | Defective evaporator fan. | Please contact your Agilent service representative. |
5 | Defective condenser fan. | Please contact your Agilent service representative. |
6 | Blown fuses. | Please contact your Agilent service representative. |
7 | Defective mainboard. | Please contact your Agilent service representative. |
8 | Improperly positioned cables or wires obstructing fan blades. | Please contact your Agilent service representative. |
base-id: 3283727883
id: 54043198812173835